Clevo N770WU Service Manual page 39

M.2 SSD Installation Procedure
1. Place the thermal pad on the bottom case as shown
1
2. Insert the module in the computer
2
3. Tighten the screw to secure it in place
3
a.
(Figure
( Figure 11b ) .
(Figure 11c).
b.
c.
1
Thermal Pad
Be sure to place the thermal pad's adhesive side down onto the
mainboard surface.
The thermal pad's thickness differ for different M.2 SSD module:
• For module with chip, use 2.5mm thick thermal pad.
• For module without chip, use 3.5mm thick thermal pad.
11a).
2
Removing and Installing the M.2 SSD Module 2 - 17
Disassembly
Figure 11
M.2 SSD Module
Installation
a. Place the thermal pad.
b. Insert the module.
c. Tighten the screw.
3
1. Thermal Pad
2. M.2 SSD Module
• 1 Screw