Premiere Intermittent Sprocket Drive; Electronic Components; Main Board And Premiere Intermittent Sprocket Drive In The Projector Console - Kinoton FP 38 E Premiere Operating Manual

FP 50 E
3 .7 .2

PREMIERE Intermittent Sprocket Drive

Via pulses the main drive encoder counts quantity of film (transport unit = 1 picture),
which is transported out of feed sprocket into film gate.
If one "transport unit" is completely counted and shutter position is dark the motor of
intermittent sprocket carries on film for one picture.
This operation is controlled by a microprocessor which is mounted on main board.
3 .8

Electronic Components

NOTE
X
Z In this chapter you will get an overview of the electronic components, which are
mounted in the projector console.
Z The console door should only be opened by authorized service staff.
Z All work on electronic parts must be carried out only by experts.
3 .8 .1

Main Board and PREMIERE Intermittent Sprocket Drive in the Projector Console

The main board is the projector's control center. It provides:
» DIP switches for setting projector functions
» LEDs for, e. g. shutter adjustment indication or voltage error indication
» Interfaces for different connections.
34
2
3
1
4
5

Main board
Á
FPS 300 amplifier
Â
Power supply unit for FPS 300
Ã
Mains transformer
Ä
EMK 1 automation system
(option)
Issue: 08/2012