Advertisement
Quick Links
Advertisement
Related Manuals for Ethicon NTLC55
Summary of Contents for Ethicon NTLC55
- Page 1 ETHICON Linear Cutter Steps to Use *Ethicon Endo-Surgery™ Linear Cutter...
-
Page 2: Steps To Use
Gripping Surface Steps to Use Anvil Half Anvil Fork Models available: (55mm, 75mm) Staple Retaining Cap NTLC55, NTLC75 Locking Rib Staple Height Selector Reloads available: SR55, SR75 Gripping Surface Cartridge/Reload Half Cartridge/Reload Fork Alignment Tab Alignment Slot Firing Knob Alignment/Locking Lever... - Page 3 Place the instrument across the tissue for transection or into the lumen to form an anastomosis. With the Alignment/Locking Lever in the completely opened position, join the instrument halves together by aligning from either the front, center, or back of the instrument. To adjust tissue on the forks before firing, move the Alignment/Locking Lever to the intermediate position.
- Page 4 Ensure that the Cartridge/Reload Fork and the Anvil Fork are With the instrument closed, the Firing Knob is rotated to either aligned. Close the Alignment/Locking Lever completely when the side of instrument. tissue is properly in place. Note: In its pre-firing position, the Firing Knob cannot be rotated Note: When firing across thick tissue, holding the jaws in place from its pre-firing position unless the Alignment/Locking Lever is for 15 seconds after closing and prior to firing may result in better...
- Page 5 Reload. The staple drivers are used to push the staples out of the pocket, through the tissue to be stapled and into the Forming Anvil. For complete product information, including full steps for use, indications, contraindications, warnings and precautions, please see the Instructions for Use. ©2016 Ethicon Inc. All Rights Reserved. 048666-160307...
Need help?
Do you have a question about the NTLC55 and is the answer not in the manual?
Questions and answers