Attach The Gps Unit To The Handle Of A Bicycle Or A Motorcycle Using The Holder - Sony GPS-CS1KASP Operating Instructions Manual

Attach the GPS unit to the handle of a
bicycle or a motorcycle using the
holder
Using the supplied holder and bracket, you can attach the GPS unit to the
handle of a bicycle or a motorcycle.
• The diameter of the handle supported by the bracket is 20 mm to 35 mm.
• Attach the bracket to the part where the GPS unit will not interfere with the
operation of the bicycle or motorcycle.
• The compatibility of the bracket cannot be guaranteed for all bicycles or
motorcycles.
1
Attach the bracket to the handle of the bicycle etc.,
following the procedure below.
1 Remove the screw cap of the bracket, then wind the belt around the handle.
2 Adjust the belt and leave approx. 3 mm of space for the part [A] as illustrated
below.
3 Tighten the screw of the bracket firmly to fix it to the handle.
2
Insert the GPS unit into the carrying case.
GB
24
3 mm
Screw cap
Pull both sides of
the belt to loosen
the belt.