Related Manuals for elero Revio-868-P
Summary of Contents for elero Revio-868-P
-
Page 1: Operating Instructions
Revio-868-P Operating instructions Please take care of the operating instructions! elero GmbH Antriebstechnik Linsenhofer Str. 59–63 D-72660 Beuren info@elero.de www.elero.com 309 308 00 Nr. 18 100.8001/0705... - Page 2 Venetian blind jumper ......GB- 7 • Only use unmodified original elero electrical Group control jumper .
-
Page 3: General Information
Explanation of buttons and display intended use Explanation of buttons and display General information The Revio-868-P is an flush mounted radio receiver. It is P button suitable for control of 230 V roller shutter, blind and venetian blind motors. In addition you can control all ProLine control units as well as... - Page 4 • If more than one drive is controlled using the to further control units Revio-868-P the drives must be decoupled with relay controls. Connection of drive and control unit from another manufacturer • Note the switching current of the device.
- Page 5 1. When the power supply is restored or by pressing the P-button However, if you press a travel key for longer than 3 seconds the (min. 5 Sec) on the Revio-868-P, the device is ready to Revio-868-P goes into self-holding mode.
- Page 6 Bad radio reception. Aerial or receiver Change position in unfavourable position. of receiver or aerial. General conformity declaration: Herewith the company elero GmbH declares that the Revio-868-P device satisfies the basic requirements and other relevant regulations of the 1999/5/EC guidelines. GB-9 GB-10...
Need help?
Do you have a question about the Revio-868-P and is the answer not in the manual?
Questions and answers