Equipment Combinations; Product Documentation; Technical Design - Siemens RMZ78 Series Manual

Ordering

Equipment combinations

Product documentation

Technical design

2 / 10
Siemens
Building Technologies
Product number Designation
RMZ785 Universal modul (8 UI)
Universal modul (4 UI, 4 DO)
RMZ787
Universal modul (4 UI, 2 AO, 2 DO)
RMZ788
Universal modul (6 UI, 2 AO, 4 DO)
RMZ789
When ordering, please give name and type reference, for example:
Universal module RMZ785
The module connector listed under "Accessories" must be ordered as a separate
item, if required.
The universal modules must be used in connection with controls of the
Synco™ 700 family. At present, the following combinations are possible:
Type of Synco device
Universal controller RMUB..
Heating controller RMH760B
Boiler sequence controller RMK770
Control center RMB795
Control and monitoring unit RMS705B
For details of these Synco devices, refer to Product Range Description S3110 or
the document of the selected application.
Name
Mounting Instructions
Product Range Description
Declaration of Conformity (CE)
Environmental Declaration
The RMZ78... universal modules complement the range of Synco™ 700 controls.
They cannot be operated autonomously.
The universal modules are incorporated into the Synco™ 700 controls in the basic
configuration. All settings associated with the universal modules are made on the
relevant Synco™ 700 control.
The signals from sensors, signal sources, etc., are delivered to the Synco™ 700
device for handling. The control signals and commands generated by the control
are fed back to the respective universal module from where they are passed on to
the connected actuating devices.
The universal module is powered by the relevant Synco™ 700 control, which also
identifies and monitors the module.
Universal Modules
–
– –
– –
–
Document no.
M3110
S3110
T3110
E3110...02
CE1N3146en
2016-03-10