Engine Compatibility - Weego 22 Owner's Manual

UNDERSTANDING YOUR Smarty Clamps®
Your
Smarty Clamps•
have a "smart" box that will help guide you through a
jump with both sight and sound. It will let you know when it is safe to jump
or if there is an error.
e
READY
Solid green light, no Sound
Smarty Clamps• detect that you have a good connection
and you are ready
to
jump.
M
REVERSE+/·
Rashlng Green & Red Lights+ Beeping
You attached the Smarty
Clampse
on the wrong terminals.
Make sure the BLACK clamp is attached
to
the battery's
NEGAllVE (·)terminal, and the RED clamp is attached
to
the
battery's POSITlVE (+) terminal.
If
not attached properly,
Weego 22 will not let you jump your engine.
~
COOL DOWN
Rashlng Red Light+ Beeping
~
WAITFOR e
This happens when )UUr Weego is cranked longer than the
recommended 3 seconds, or if your engine is trying
to
pull more
power than the
Weego
22 is willing to provide.
Detach
the
Smarty Clampse from the battery and give the unit up
to
3
minutes
to
cool down. Then, repeat
steps
2-5 under Jump
Starting Your Engine.
e
SEE REVERSE
Solid Red Ught, No Sound
This means the vehicle's battery is too weak
to
even start,
OR
the system voltage of your vehicle is not compatible with your
Weego 22 (for 12¥ vehicles ONLY).
e
SEE REVERSE
Solid Red Ught + Beeping
There may be an engine size issue. If the engine )Uu're
connecting
to
is larger than
what
we
recommend, it will try
to
pull
more pa.ver than your
Weetp
22 is able
to
give. If, this happens
Weego
22 will prevent )Uu from jumping your engine. Please see
Engine Compatibility in your owner's manual
to
determine
if
)UUr
engine size falls within the scope ofWeetp 22.