Page 1
JUMP STARTING JUMP STARTING POWER PACK POWER PACK QUICK START GUIDE QUICK START GUIDE Model No. 22 Model No. 22...
Page 2
Lanyard Post 5V/3A Recharge (Input) Port CHARGE UP YOUR WEEGO 22 When you unpack your new Weego Jump Starter 22 for the first time, charge it up to 100% using the Micro Indicator USB Charging Cord or Car Charger provided. If using...
Page 3
NEUTRAL). TURN OFF ALL ELECTRONICS! – air conditioner, radio, lights, etc. Remove any devices attached to your Weego 22. Never leave your Weego 22 connected to your engine’s battery unless actively jumping. Always disconnect the Smarty Clamps ®...
Page 4
Securely connect the to your Smarty Clamps ® Weego 22, then power ON. Place your Weego 22 in a secure location or Power ON Power ON suspend using the provided hook & lanyard so it won’t fall. Attach BLACK clamp to your battery’s negative (-) terminal, then the clamp to your battery’s...
If you’ r e unit won’t power on, won’t take a charge OR won’t charge past a few lights then it’ s been overdischarged. This can happen if the unit is left ON, or if an engine pulled the Weego battery past a certain limit during a jump start.
Page 6
Weego 22 is able to give. Please see Engine Compatibility in the owner’s manual to determine if your engine size falls within the scope of Weego 22.
Page 7
200A could need up to 700A in the extreme cold. In addition, if your Weego was stored in the cold temps it will make it harder for the Weego to deliver its full power.
Need help?
Do you have a question about the 22 and is the answer not in the manual?
Questions and answers