Install The Device; Verify Device Installation - Abocom WPG2500 User Manual

Install the device

Note: Make sure the procedures in "Install the Driver & Utility" has
been performed.
1. Make sure the computer is turned off. Remove the expansion
slot cover from the computer.
2. Carefully slide the Wireless PCI Card into the PCI slot. Push
evenly and slowly and ensure it is properly seated, you may
have to use the mounting screw to have the card screwed
securely in place.
3. After the device has been connected to your computer, turn on
your computer. Windows will detect the new hardware and then
automatically copy all of the files needed for networking.
Note for Windows 98 users:
Before installation of the device, make sure you have your operating
system CD-ROM at hand. You may be asked to insert the OS CD-ROM
in order to download specific drivers.

Verify Device Installation

To verify that the device has been properly installed in your computer and is
enabled, go to Start
Device Manager. Expand the Network adapters item. If the Realktek RTL8151
54M Wireless LAN Network Adapter is listed, it means that your device is
properly installed and enabled.
Settings Control Panel
-
System (
6 -
Hardware)