Abocom 802.11b/g Wireless LAN PCI Card WPG2500 Specifications

802.11b/g Wireless LAN

PCI Card

The WPG2500 is an IEEE802.11g compliant wireless PCI Card.
It provides superior performance and interoperability within a
mixed mode network (802.11b and 802.11g). The WPG2500 is
backwards compliant with
making it a seamless integrator for the most popular wireless
networks. Plus, this all-new wireless PCI Card provides a high
transfer rate up to 54Mbps for today's high-speed broadband
connections.
The WPG2500 allows you to take full advantage of your PC's mobility with access to real-time information and online
services anytime and anywhere. Plus, with the network installation simplicity and flexibility, you can eliminate the
need to pull cable through walls and ceilings and allow the network to go where wires cannot go. Exploring WWW and
augmenting networks can never be done more easily.
FEATURES
Complies with IEEE 802.11b and 802.11g standard
for 2.4GHz Wireless LAN.
Compliant with PCI 2.2 Standard.
Works with all existing network infrastructure.
Complies with specific wireless products and
services.
Capable of up to 128-Bit WEP,TKIP and AES.

SPECIFICATIONS

Standard
Host Interface
Operating Voltage
Power Requirement
Antenna Type
Frequency Range
Modulation
Number of Selectable Channels
all 802.11b wireless equipment,
IEEE 802.11b, IEEE 802.11g Standard
PCI Interface 2.2
3.3V
Power consumption at 11g
TX:330mA Rx:330mA
Power consumption at 11b
Tx:340mA Rx:300mA
Dipole Antenna
2.412GHz-2.4835GHz
11g:Orthogonal Frequency Division Multiplexing (OFDM)
54Mbps/48Mbps:QAM-64
36Mbps/24Mbps:QAM-16
18Mbps/12Mbps:QPSK
9Mbps/6Mbps:BPSK
11b:Direct Sequence Spread Spectrum (DSSS)
11Mbps/5.5Mbps:CCk
2Mbps:DQPSK
1Mbps:DBPSK
USA, Canada (FCC): 11 channels (2.412GHz~2.462GHz)
Europe (CE): 13 channels (2.412GHz~2.472GHz)
Japan (TELEC): 14 channels (2.412GHz~2.4835GHz)
Freedom to roam while staying connected.
Up to 54 Mbps data transfer rate in 802.11g mode
of operation.
Supports Windows98/ ME/ 2000/ XP
Lower power consumption.
Easy to install and configure.