Table of Contents
Advertisement
Key Length
Default Key Index
Encryption1~4
802.11x configure
EAP TYPE
Tunnel
Passphrase of your wireless network.
Select the key length from the pull-down menu,
either 64Bit or 128 Bit.
If you are using 64-bit WEP encryption, then the key
must consist of exactly ten hexadecimal characters. If
you are using 128-bit WEP encryption, then the key
must
consist
xadecimal characters. Valid hexadecimal characters
are "0" to "9" and "A" to "F".
Select the default key index from the pull-down
menu.
To configure your WEP settings. WEP (Wired
Equivalent Privacy) encryption can be used to
ensure the security of your wireless network. Select
one Key and Key Size then fill in the appropriate
value/phrase in Encryption field. Note: You must use
the same Key and Encryption settings for the both
sides of the wireless network to connect
KEY1 ~ KEY 4：You can specify up to 4 different
keys to decrypt wireless data. Select the Default key
setting from the radio button.
Encryption：This setting is the configuration key
used in accessing the wireless network via WEP
encryption.
A key of 10 hexadecimal characters (0-9, A-F) is
required if a 64-bit Key Length was selected.
A key of 26 hexadecimal characters (0-9, A-F) is
required if a 128-bit Key Length was selected.
A key of 58 hexadecimal characters (0-9, A-F) is
required if a 256-bit Key Length was selected.
Select the EAP TYPE from the pull-down list.
Including MD5, GTC, TLS, LEAP, TTSL and PEAP.
Select the tunnel from the pull-down menu, including
CHAP,
MSCHAP,
EAP-MD5.
-
24 -
of
exactly
MSCHAP-V2,
26
he
PAP
and
Advertisement
Table of Contents
