Abocom WPG2500 User Manual page 22

SSID
Signal Strength
Link Quality
Total Throughput
Throughput TX
Throughput RX
Network Address
MAC Address
IP Address
Subnet Mask
Gateway
Show Tray icon
Radio Off
Windows Zero Config
The SSID is the unique name shared among all
points in your wireless network.
The name must be identical for all devices and points
attempting to connect to the same network.
The signal strength from the network Access
Point or station. The strength is displayed in
three formats: a signal quality level (one of five
levels, from Bad to Best), a numerical value in
dBm, and a signal quality bar graph with a scale
of –82 to –10.
Shows the link quality percentage.
Shows the total throughput percentage.
The actual instantaneous transmitting rates.
The actual instantaneous receiving rates.
The MAC address of this wireless adapter.
The IP address of this wireless adapter.
The subnet mask of this wireless adapter.
The default gateway address of the adapter.
Place a check in the check box to show the utility
icon in the tray.
Place a check in the check box to disable the radio
function.
External Configuration Checkbox (Windows XP
only): A checkbox that enables you to disable the
WLAN Station Configuration Utility and indicates
that the station driver is to be configured with
Windows XP's built-in Zero Configuration Utility
(ZCU).
-
19 -