Cable Installation; Figure 2-2. Typical Odu Unit Installation - Comtech EF Data DST Operator's Manual

Digital Satellite Terminal System
Installation
2.3.3

Cable Installation

Note: Prior to connecting the cables, ensure that the ODU and LNB voltages have been
switched off.
1. Connect RX L-Band cable from the LNB to the IDU CP3 connector.
2. Connect TX L-Band cable from the BUC to the IDU CP1 connector.
RX L-band
Upper
Bracket
Lower "L"
Bracket
TX L-band
Cable
LNB
Cable
BUC

Figure 2-2. Typical ODU Unit Installation

TRF
.
2–6
Revision 1
MN/DST.IOM