Digital Satellite Terminal System
Introduction
1.3.2
Options
The DST includes the following options:
How Enabled
Hardware + Fast
Hardware
Hardware
Hardware
Hardware
Hardware
Hardware
Hardware
Hardware
Hardware
1.4
Specifications
The following tables list the system and individual component specifications.
IDU Specifications
Block Up Converter (BUC)
Low Noise Block (LNB) Converter
Serial Interface
M&C Items
Configuration Retention
FSK Serial Communications
Parameter
Construction
TX Cable Connector
RX Cable Connector
Insertion Loss
VSWR
Adapter CN/F-N-ADP-MF
IDU Options
See modem manual for additional details
24 VDC 100W AC ODU (BUC) Power Supply
48 VDC 150W AC ODU (BUC) Power Supply
BUC power 2 watts
BUC power 5 watts
BUC power 10 watts
IFL Cables
LNB 3.625 to 4.200 GHz
TX Reject Filter
Mounting Kits
Table 1-1. Specifications
Parameter
Remote Control Specifications
BUC FSK Communications
Table 1-2. IFL Cable Specifications
Double-Shielded Coaxial
Type N Male Connectors
Refer to Modem manual.
1.0 dB/10 feet max
1.25:1
Type F Male to Type N Female - Adapts Type N Cable modems
with Type F RX Connector.
Specification
Refer to modem Installation and Operation Manual
Contact Comtech EF Data Customer Support department.
Contact Comtech EF Data Customer Support department.
EIA-232 or EIA-485 (2- or 4-wire)
TX Frequency
TX Power
Data Rate Select
Scrambler (On/Off)
RX Carrier Detect
Power Supply Voltages
Plesiochronous Buffer
FSK parameters
At least 1 year without power
Refer to modem Installation and Operation Manual
Specification
1–5
Revision 1
MN/DST.IOM
RX Frequency
Transmitter On/Off
Data Loopback
IF Loopback (L-Band)
RAW Corrected Eb/No
RX Signal Level
Fault Status
Error Threshold Alarm