Table of Contents
Advertisement
Digital Satellite Terminal System
Installation
2.2.2
Mounting Kit
2.3
Installation
2.3.1
IDU Installation
Tools Required:
Screw Driver
5/32-inch
Refer to Figure 2-1. Use mounting kit KT/6228-1.
1. Install the IDU rear support brackets as follows:
Table 2-2. Optional: Mounting Kit, KT/6228-1 (IDU to Rack)
QTY
Part Number
2
FP/6138-1
4
HW/10-32x1/2RK
2
HW/10-32X1/4 SHC
Phillips
SAE Allen Wrench
a. Install provided rear support bracket onto the mounting rail of the rack.
Fasten with provided bracket bolts.
b. Fasten the provided #10 socket head screws to the rear-side mounting holes
on either side of the chassis modem. Mount the modem into the equipment
rack ensuring that the socket heads engage into the slots of the rear support
brackets.
Note: It may be necessary to adjust the location of the rear mounting rails of
the rack.
c. Refer to Chapter 3 prior to connecting.
Description
Bracket, Rear Support
Bolt, #10 Rack
Screw, Socket 10-32 x 1/4inch
2–3
Revision 1
MN/DST.IOM
Advertisement
Table of Contents
