Chapter 1. Introduction; Dst Overview - Comtech EF Data DST Operator's Manual

This equipment is designed for maximum reliability and performance in C- and/or Ku-
Band applications.
1.1

DST Overview

The Digital Satellite Terminal (DST) (Figure 1-1) consists of three major components:
L-Band Satellite Modem – provides conversion of data to L-
Band and delivers power and a 10 MHz reference signal to
the outdoor equipment.
For additional information. Refer to the modem Installation
and Operations Manual
Provides frequency conversion from L-Band to C- or Ku-Band and power amplification to a selectable transmit power level.
Provides frequency conversion of the received signal from C- or Ku-Band to L-Band and power amplification of the signal
with low levels of noise added.

Chapter 1. INTRODUCTION

DST
A Block Up Converter (BUC)
A Low Noise Block (LNB) Down Converter
Internet Enabled L-Band Satellite Modem – provides an
Ethernet data interface, L-Band IF interface and delivers
power and a 10 MHz reference to the outdoor equipment.
For additional information. Refer to the modem Installation
and Operations Manual.
1–1
iProSat