WALLACH ZOOMSTAR User Manual page 10

3. Then attach the C-Mount Adaptor to the TriStar.
4. Plug in the S video cable if you have an analog camera. Next, plug in the power supply.
Then plug the power supply into the wall. For a USB camera, plug the USB cable into the
camera and the other end into the US port on the laptop or PC.
5. After the C Mount has been attached to the colposcope, the camera needs to be oriented
so that the image on the monitor is the same as that viewed through the optical head. On
the C mount, loosen the large silver knurled ring. Rotate the camera head until the image
on the monitor is the same as what is viewed through the optical head. Once it is aligned
properly, rotate the knurled ring clockwise until it is locked in a snug position.
IMSC036-DFU • Rev. B • 10/14 10 Made in the USA