Operating The User Interface (Ui) - Rentokil RADAR Single Connect Manual

Operating the User Interface (UI)

1
Device Status *
2
Catch Duration *
Number of days since
each chamber has
been activated
3
Battery Level *
Percentage of battery
capacity remaining
4
Service Mode
Catch tray can now
be removed & unit
serviced.
5
Radio Connection *
CONNECT devices only
6
Range Check Mode
CONNECT devices only
NOTE:
Will time out after
1 hour
* NOTE: Will time out after 60 seconds
Armed but not triggered
(Solid LED)
Dot will identify which
chamber has activated
Catch tray can be
removed & unit serviced
R1 - R9 = Radio signal strength Level 1 - 9
Flashing right ● = Beacon detected from Control Panel
Solid right ● only = Control Panel heard, but not connected
3.0.
R1 - R9 = Radio signal strength Level 1 - 9
Flashing right ● = Beacon detected from Control Panel
Solid right ● only = Control Panel heard, but not connected
16
8.8.
Device triggered
(Flashing LED)
Eg: Right chamber
activated 3 days ago
8.8. 3.0.
When refi tted, the unit will
automatically self-test &
fl ash all LED's
8.8.
8.8.
8.8.