11
In every motor movement, final position (when motor stops) is saved after 10 secs into controller's EEPROM memory. This
will ensure that next time you power on the controller, last saved position will be retrieved from its memory.
Current Motor Position
Controller continuously (every 500 milisec) reports motor / focuser position. Reading can be found in the following image:
Set A New Motor Position
You can easily specify a new motor position. Set the value and click "GO" button.
Motor will start moving to the new position you defined.
Emergency Motor Stop
Click the "STOP" yellow button and the motor will instantly stop. This can save you if you specified a wrong position and the
focuser is quickly extended reaching its limits.
Temperature of sensor
Existing environmental temperature of the sensor can be seen in the following reading.
Click the graph icon and a graph which displays temperature over time will appear
You can easily check when was the last focus temperature so you can know exactly if it is time to refocus.
PEGASUS ASTRO - FOCUSCUBE
| v1.1