Table of Contents
Advertisement
Custom Rates
You can easily set and save custom names and step / pulse values in the following section of "Setup" page.
Click "OK" and your rate settings will appear in the main window of the application.
Control Motor
From these buttons you will control the steps of the stepper motor or pulses from the DC motor.
•
Set the "Step" to the value you want (bigger the step / pulse count, larger the movement of the motor shaft)
You can also quick select the predefined values you specified in "Custom Rates"
•
Click once the "step number" button. This is how many steps the motor will move forward (+ steps) or backwards (-
steps).
Notice that "Position" indicator will change its value and will confirm your command
There are two more buttons (<<< & >>>) that will forward / reverse accelerate the motor. Keep mouse down and the motor will
start accelerating to the director you clicked.
Use these buttons only if you need to quickly move in or out your focuser (be careful not to exceed focuser limits!)
PEGASUS ASTRO - FOCUSCUBE
| v1.1
10
Advertisement
Table of Contents
