ETC ColorSource ThruPower Series User Manual page 23

To set groups of dimmers to different levels:
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
To set individual dimmers to different levels:
Step 1:
Step 2:
Step 3:
Step 4:
Menu structure
ColorSource ThruPower
System OK
DMX Start = 1
L1: OK L2: OK L3: OK
V1.0.0.0.0.13
In the "Dimmer" menu option, all dimmers are selected by default, either "1
thru 12" or "1 thru 24", depending on the ColorSource model. To select a range
of dimmers, press the [Enter] (
[Decrease] (–) button to set the first dimmer. Press the [Enter] (
and then set the last dimmer in the range, using the [Increase] (+) or [Decrease]
(–) button. When finished, press the [Enter] (
In the "Level" menu uption, "100%" is set by default. To change the level, press

the [Enter] ( ) button and then the [Increase] (+) or [Decrease] (–) button.
When finished, press the [Enter] (
In the "Set" menu option, press the [Enter] (
Repeat steps 1 through 3 to set the remaining groups of dimmers.
This activates the groups dimmers you chose, at the levels you selected. This can
be verified on the Home screen, by pressing the [Home] (<<) button.
ColorSource ThruPower
System OK
DMX Start = 1
L1: OK L2: OK L3: OK
V1.0.0.0.0.13
In the "Dimmer" menu option, all dimmers are selected by default, either "1
thru 12" or "1 thru 24", depending on the ColorSource model. To select an
individual dimmer, set the first and last dimmers to the same number.
Highlight the "Dimmer" menu option. Press the [Enter] (
[Increase] (+) or [Decrease] (–) button to select the dimmer. Press the [Enter]

( ) button again to set the end of range, and press the [Increase] (+) or
[Decrease] (–) button to select the same number. For example, setting both start
and end of range numbers to "1" selects dimmer #1, individually. When
finished, press the [Enter] (
In the "Level" menu uption, "100%" is set by default. To change the level, press

the [Enter] ( ) button and then the [Increase] (+) or [Decrease] (–) button.
When finished, press the [Enter] (
In the "Set" menu option, press the [Enter] (

) button and then press the [Increase] (+) or

) button

) button.

) button.

) button

) button.

) button.

) button again

) button and then the
19