Air Inlet Net; Sholder Strap; Storage - Jonsered BB2250 Operator's Manual

J1158741-95,BB2250_English.fm Page 17 Monday, November 21, 2016 10:44 AM

AIR INLET NET

IMPORTANT
• Blown air is taken in from the air inlet net. If the air flow drops during opera-
tion, stop the engine and inspect the air inlet net for blockage by obstacles.
• Note that failure to remove any such obstacles may result in the engine
becoming overheated and damaged.
(1) Net
WARNING
Never use the blower without the net on the blower. Before each use, check that
the net is attached in place and is free from any damage.

SHOLDER STRAP

• If the shoulder strap is damaged it may break during use, thus causing the product
to fall and resulting in personal injury. Follow the instructions below to replace the
shoulder strap with new one.
• Pass the upper end of the strap through the hanger, making the FLAPPED SIDE
OUTSIDE.
• Put the end of the strap through the ring on the strap, and then push the ring toward
the hanger as close as possible.
(1) Ring
BEFORE STORING THE BLOWER:
1. Drain the fuel tank and push the primer bulb until it becomes empty of fuel.
2. Remove the spark plug and drop a spoonful of 2-cycle oil into the cylider. Crank the engine several time and install the spark plug.
3. Store unit in a dry, cool and dark, well-ventilated, dust-free place, out of the reach of children.
Maintenance

Storage

English
F20
(1)
F21
17