Digital Zoom; Wide Select - Sony HDR-UX1 Operating Manual

and the setting value appear when [WB
SHIFT] is anything other than the default
setting.
z Tips
• When the white balance is set to a lower value,
images appear bluish, and when set to a higher
value, images appear reddish.
• You can also adjust the setting manually using
the camera control ring (p. 46).
NS LIGHT (NightShot
Light)
When using either the NightShot (p. 45) or
[SUPER NS] (p. 97) function to record, you
can record clearer images by setting [NS
LIGHT], which emits infrared light
(invisible), to [ON] (the default setting).
b Notes
• Do not cover the infrared port with your fingers
or other objects (p. 45).
• Remove the conversion lens (optional).
• The maximum shooting distance using [NS
LIGHT] is about 3 m (10 feet).

WIDE SELECT

When recording with SD (standard
definition) image quality, you can select the
aspect ratio according to the TV connected.
Refer also to the instruction manuals
supplied with your TV.
B 16:9 WIDE
Records images to the full screen on a 16:9
(wide) TV screen.
4:3 ( )
Records images to the full screen on a 4:3
TV screen.
b Notes
• Set [TV TYPE] correctly according to the TV
connected for playback (p. 90).
• You cannot change the aspect ratio on a
DVD+RW midway.

DIGITAL ZOOM

You can select the maximum zoom level in
case you want to zoom to a level greater
than 10 × (the default setting) during
recording. Note that the image quality
decreases when you use the digital zoom.
The right side of the bar shows the digital
zooming factor. The zooming zone
appears when you select the zooming
level.
B OFF
Up to 10 × zoom is performed optically.
20 ×
Up to 10 × zoom is performed optically,
and after that, up to 20 × zoom is
performed digitally.
80 ×
Up to 10 × zoom is performed optically,
and after that, up to 80 × zoom is
performed digitally.
STEADYSHOT
You can compensate for camera shake (the
default setting is [ON]). Set
[STEADYSHOT] to [OFF] (
using a tripod (optional), then the image
becomes natural.
EXP.FOCUS (Expanded
focus)
Select [ON] so that the image on the screen
is magnified by about 2 times when
adjusting focus manually (p. 94). The
screen returns to the original size
automatically when the focusing is finished.
Touch [OFF] to release this function.
) when
83
Continued ,