Sub-T Date - Sony HDR-UX1 Operating Manual

MOVIE SETTINGS (Continued)
b Notes
• You cannot activate this function during
recording.
• The function is released if you use the zoom
function.
GUIDEFRAME
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The frame is not recorded. Press DISP/
BATT INFO to make the frame disappear.
z Tips
• Positioning the subject at the cross point of the
guide frame makes a balanced composition.
ZEBRA
Diagonal stripes appear in portions of the
screen where brightness is at a preset level.
This is useful as a guide when adjusting the
brightness. When you change the default
setting, is displayed. The zebra pattern
is not recorded.
B OFF
The zebra pattern is not displayed.
70
The zebra pattern appears at a screen
brightness level of about 70 IRE.
100
The zebra pattern appears at a screen
brightness level of about 100 IRE or
higher.
b Notes
• Portions of the screen where brightness is about
100 IRE or above may appear overexposed.
z Tips
• IRE represents the screen brightness.
84
REMAINING
B AUTO
Displays the remaining disc indicator for
about 8 seconds in situations such as those
described below.
– When your camcorder recognizes the
remaining disc capacity with the POWER
switch set to
– When you press DISP/BATT INFO to
switch the indicator from off to on with
the POWER switch set to
– When you select the movie recording
mode on the HOME MENU.
ON
Always displays the remaining disc
indicator.
b Notes
• When the remaining recordable time for movies
is less than 5 minutes, the indicator stays on the
screen.

SUB-T DATE

Select [ON] (the default setting) to display
the recording date and time when you play
back a disc on a device with a subtitle
display function. Also refer to the
instruction manual of the playback device.
b Notes
• Discs recorded with HD (high definition) image
quality can be played on AVCHD format
compatible devices only (p. 74).
RING SETTING
You can assign an item you want to set to
the camera control ring and adjust it
manually using the camera control ring.
B FOCUS
Assigns [FOCUS] (p. 94) to the camera
control ring.
EXPOSURE
Assigns [EXPOSURE] (p. 95) to the
camera control ring.
(Movie).
(Movie).