Sony HDR-UX1 Operating Manual page 146

Identifying parts and controls (Continued)
Remote Commander
A DATA CODE button (88)
Displays the date and time or camera setting
data of the recorded images when you press this
during playback.
B PHOTO button (42)
The on-screen image when you press this
button will be recorded as a still image.
C SCAN/SLOW buttons (49)
D . > (Previous/Next) buttons (49)
E PLAY button (49)
F STOP button (49)
G DISPLAY button (31)
H Transmitter
I START/STOP button (p.41)
J Power zoom buttons (43, 51)
K PAUSE buttons (49)
L VISUAL INDEX button (48)
Displays a VISUAL INDEX screen when you
press this during playback.
M b / B / v / V / ENTER buttons
When you press any button on the VISUAL
INDEX screen or Playlist, the orange frame
appears on the LCD screen. Select a desired
button or an item with b / B / v / V, then press
ENTER to enter.
146
Insulation sheet
b Notes
• Remove the insulation sheet before using the
Remote Commander.
• Point the Remote Commander towards the remote
sensor to operate your camcorder (p. 145).
• When no commands have been sent from the
Remote Commander in a certain period, the
orange frame disappears. When you press any of
b / B / v / V, or ENTER again, the frame appears
at the position where it was displayed last.
• You cannot select some buttons on the LCD
screen using b / B / v / V.
• To change the battery, see page 138.