Flash Level; File No; Redeye Reduc - Sony HDR-UX1 Operating Manual

QUALITY
B FINE ( )
Records still images at the fine image
quality level.
STANDARD ( )
Records still images at the standard image
quality level.

FILE NO.

B SERIES
Assigns file numbers in sequence even if
the "Memory Stick Duo" is replaced with
another one. The file number is reset when
a new folder is created or the recording
folder is replaced with another.
RESET
Resets the file number to 0001 each time
the "Memory Stick Duo" is changed.
AE SHIFT
See page 82.
WB SHIFT (White
Balance Shift)
See page 82.
NS LIGHT (NightShot
Light)
See page 83.
EXP.FOCUS
See page 83.
GUIDEFRAME
See page 84.
ZEBRA
See page 84.

FLASH LEVEL

You can set this function when you use the
built-in flash, or an external flash (optional)
that is compatible with your camcorder.
HIGH( )
Makes the flash level higher.
B NORMAL( )
LOW( )
Makes the flash level lower.

REDEYE REDUC

You can set this function when you use the
built-in flash, or an external flash (optional)
that is compatible with your camcorder.
You can prevent redeye by activating the
flash before recording.
Set [REDEYE REDUC] to [ON], then press
(flash) (p. 44) repeatedly to select a
setting.
(Auto redeye reduction): Pre-flashes to
reduce redeye before the flash automatically
flashes when there is insufficient ambient
light.
r
(Forced redeye reduction): Always
uses the flash and the redeye reducing pre-
flash.
r
(No flash): Records without flash.
• The redeye reduction may not produce the
desired effect due to individual differences and
other conditions.
RING SETTING
See page 84.
87