Remote Commander; Searching Quickly For A Desired Scene (Zero Set Memory) - Sony Handycam HDR-HC1 Operating Manual

Remote Commander

Remove the insulation sheet before using
the Remote Commander.
Insulation sheet
1
q;
2
3
4
5
 PHOTO (p. 24)
The on-screen image when you press this
button will be recorded as a still image.
 SEARCH M. (p. 35)

 
 Video control buttons (Rewind,
Playback, Fast-forward, Pause, Stop,
Slow) (p. 25)
 ZERO SET MEMORY
 Transmitter
 REC START/STOP (p. 24)
 Power zoom (p. 26)
 DISPLAY (p. 19)
 Memory control buttons (Index, –/+,
Memory playback) (p. 25)
• Aim the Remote Commander towards the
remote sensor to operate your camcorder (p.
29).
34
• To change the battery, see page 110.
Searching quickly for a desired
scene (Zero set memory)
1
During playback, press ZERO
SET MEMORY
6
want to locate later on.
The tape counter is reset to "0:00:00"
7
and
8
If the tape counter is not displayed,
9
press DISPLAY
2
Press STOP
stop playback.
3
Press
The tape stops automatically when the
tape counter reaches "0:00:00."
4
Press PLAY
Playback starts from the point
designated "0:00:00" on the tape
counter.
• There may be a discrepancy of several seconds
between the time code and the tape counter.
• Zero set memory will not function correctly
if there is a blank section between recorded
sections on the tape.
To cancel the operation
Press ZERO SET MEMORY

at a point you
appears on the screen.
60min 0:00:00
P-MENU
 .

when you want to

REW .


.
 again.