Problem Solving Guide; The Programme Does Not Start - Miele WCE 660 Operating Instructions Manual

Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Some of the messages in the display are more than one line long. Touch the  or
 sensor to read them in full.

The programme does not start

Problem
The display remains
dark, and the Start/Stop
button indicator light
does not come on.
The display prompts
you to enter a code.
The following appears
in the display:

 Service Door lock
fault F34
Cause and remedy
There is no power to the machine.
 Check whether the mains plug is plugged in and
switched on.
 Check whether the fuse or circuit breaker has
tripped.
The washing machine has switched off automatically
to save energy.
 Switch it back on with the  button.
Access via a code has been activated.
 Enter the code and confirm the entry. Deactivate
the code if you do not wish this message to
appear in the display the next time the machine is
switched on.
The door is not closed properly. The door lock could
not engage.
 Close the door again.
 Start the programme again.
If the fault message appears again, contact Miele.

Problem solving guide

61