Switching The Screen Display, Or Turning The Lcd Backlight On/Off; Acquiring Location Information (Gps) (Hdr-Xr200Ve) - Sony HDR XR 105 E User Manual

[TIMING]
Select the recording start point after START/STOP is pressed. The default setting is [3sec
AFTER].

Notes
You cannot record sound with [SMTH SLW REC].

Image quality of [SMTH SLW REC] is not as good as that of normal recording.


Switching the screen display, or turning the LCD backlight on/off

Each time you press DISP, the screen indicators, such as remaining battery power, etc., turn
on or off.
To turn off the LCD backlight, press and hold DISP down for a few seconds until
This setting is practical when you use your camcorder in bright conditions or you want to save
battery power. The recorded image will not be affected by the setting. To turn on the LCD
backlight, press and hold DISP down for a few seconds until

Acquiring location information (GPS) (HDR-XR200VE)

Set the GPS switch to ON (
to triangulate. When your camcorder triangulates successfully, it will record the location
information at the time movies and photos were recorded.
The movies and photos with location information will appear on a map (p. 43), so that you
[3sec AFTER]
[3sec BEFORE]
appears on the LCD screen). Your camcorder starts trying
8
appears.
disappears.