Sony HDR XR 105 E User Manual page 82

 OFF
ON
Tips

Positioning the subject at the cross point of the guide frame makes a balanced composition.

FLASH MODE (HDR-XR200E/XR200VE)
You can select the flash setting when you record photos using the built-in flash, or an external
flash (sold separately) that is compatible with your camcorder.
Steps
(HOME) (SETTINGS)

setting
 
 AUTO
ON ( )
OFF ( )

Notes
The recommended distance to the subject when using the built-in flash is about 0.3 to 2.5 m (1 to 8 feet).

Remove any dust from the surface of the flash before using it. Flash effect may be impaired if heat

discoloration or dust obscures the lamp.
You cannot set this item when a filter or a conversion lens is attached to your camcorder.

The /CHG (charge) lamp (p. 8) flickers while charging the flash, and remains lit when the battery charge

is complete.
If you use the flash in bright places such as when shooting a backlit subject, the flash may not be effective.

FLASH LEVEL (HDR-XR200E/XR200VE)
You can set this function when you record photos using the built-in flash, or an external flash
(sold separately) that is compatible with your camcorder.
Steps
(HOME) (SETTINGS)

setting
 
HIGH ( )
 NORMAL ( )
LOW ( )
Does not display the guide frame.
Displays the guide frame.
[PHOTO SETTINGS]


Automatically flashes when there is insufficient ambient light.
Always uses the flash regardless of the ambient brightness.
Records without flash.
[PHOTO SETTINGS]


Makes the flash level higher.
Makes the flash level lower.
[FLASH MODE]

[FLASH LEVEL]

8
a desired

a desired
