Searching For The Starting Point; Searching For The Last Scene Of The Most Recent Recording (End Search); Reviewing The Most Recently Recorded Scenes (Rec Review); Searching Quickly For A Desired Scene (Zero Set Memory) - Sony HC7 Operating Manual

Searching for the starting point

Searching for the last scene of
the most recent recording (END
SEARCH)
END SEARCH will not work once you
eject the cassette after you have recorded on
the tape.
Make sure that the CAMERA-TAPE lamp
lights up (p. 24).
Touch t
60min
END SEARCH
EXECUTING
Touch here to cancel the operation.
The last scene of the most recent
recording is played back for about 5
seconds, and the camcorder enters the
standby mode at the point where the last
recording has finished.
b Notes
• END SEARCH will not work correctly when
there is a blank section between recorded
sections on the tape.
z Tips
• You can also select [END SEARCH] from the
menu. When the PLAY/EDIT lamp lights up,
select the [END SEARCH] short-cut in Personal
Menu (p. 40).
.
1 0:00:00
CANCEL
Reviewing the most recently
recorded scenes (Rec review)
You can view about 2 seconds of the scene
recorded just before you stopped the tape.
Make sure that the CAMERA-TAPE lamp
lights up (p. 24).
Touch t
60min STBY
The last 2 seconds (approx.) of the most
recently recorded scene are played back.
Then, your camcorder is set to standby.
Searching quickly for a desired
scene (Zero set memory)
Slide the POWER switch repeatedly to turn
on the PLAY/EDIT lamp, then operate the
Remote Commander.
.
0:00:00
mREW
PLAY
STOP
DISPLAY
ZERO SET
MEMORY
Continued ,
33