Do you have a question about the MobileShave M-90 and is the answer not in the manual?
Questions and answers
Jeffrey noebels
July 6, 2025
replaced batteries but shaver does not work. unable to slide switch on when blade end is exposed
1 comments:
Mr. Anderson
August 27, 2025
The Braun M-90 shaver may not be working because the twisting protective cap must be turned until it clicks in place before the on/off switch can be pushed up to turn on the shaver. If the blade end is exposed and the cap is not in the correct position, the switch cannot be slid on.
Page 3
English Please read the use instructions carefully and thoroughly before using the appliance. Warning This appliance is suit- able for use in a bath or shower. When us- ing it in a shower, we rec- ommend that you apply shaving foam or gel. The appliance is not in- tended for use by children or persons with reduced...
Page 3
English Please read the use instructions carefully and thoroughly before using the appliance. Warning This appliance is suit- able for use in a bath or shower. When us- ing it in a shower, we rec- ommend that you apply shaving foam or gel. The appliance is not in- tended for use by children or persons with reduced...
Non-rechargeable batteries are not to be recharged. The supply terminals are not to be short-cir- cuited. Do not mix new and used batteries or different battery types. Rechargeable batteries are to be removed from the appliance before being charged. Insert batteries with correct polarity.
Non-rechargeable batteries are not to be recharged. The supply terminals are not to be short-cir- cuited. Do not mix new and used batteries or different battery types. Rechargeable batteries are to be removed from the appliance before being charged. Insert batteries with correct polarity.
Page 5
shown in (i). Do not clean the shaver foil with the brush as this may damage it. After cleaning, turn the twisting protective cap (4) 180° to cover the shaver head. In this position, the on/off switch is automatically locked to avoid accidental operation of the shaver (e.
Page 5
shown in (i). Do not clean the shaver foil with the brush as this may damage it. After cleaning, turn the twisting protective cap (4) 180° to cover the shaver head. In this position, the on/off switch is automatically locked to avoid accidental operation of the shaver (e.
Page 6
If the shaver exhibits such a defect, Braun will, at its option, either repair or replace it for the consumer without charge. Please call 1-800-Braun 11 (800-272-8611) to be referred to the authorized Braun Service Center closest to you.
Page 6
FOR CANADA ONLY 2 year limited warranty (foil and cutter block excluded) In the event a Braun shaver fails to function within 2 years from date of purchase, because of defects in material or workmanship, and the consumer returns the unit to an...
Need help?
Do you have a question about the MobileShave M-90 and is the answer not in the manual?
Questions and answers
replaced batteries but shaver does not work. unable to slide switch on when blade end is exposed
The Braun M-90 shaver may not be working because the twisting protective cap must be turned until it clicks in place before the on/off switch can be pushed up to turn on the shaver. If the blade end is exposed and the cap is not in the correct position, the switch cannot be slid on.
This answer is automatically generated