Sony Handycam HDRSR11 Operating Manual page 6

• Connect cables to the connectors of the
Handycam Station when using your camcorder
attached to the Handycam Station. Do not
connect the cables to both the Handycam
Station and your camcorder.
• Do not apply shock or vibration to your
camcorder. The internal hard disk of the
camcorder may not be recognized or recording/
playback may not be possible.
• Do not use your camcorder in very loud areas.
The hard disk of your camcorder may not be
recognized, or recording may not be possible.
• To protect the internal hard disk from shock by
dropping, the camcorder has drop sensor
function*. When a drop occurs, or under a non-
gravity condition, the block noise made when
this function is activated by the camcorder may
also be recorded. If the drop sensor catches a
drop repeatedly, recording/playback may be
stopped.
• When the temperature of the camcorder
becomes extremely high or extremely low, you
may not be able to record or play back on the
camcorder, due to the protection features of the
camcorder being activated in such situations. In
this case, a message appears on the LCD screen
or in the viewfinder (p. 30).
• Do not turn on the camcorder in a low-pressure
area, where the altitude is more than 3,000
meters (9,800 feet). Doing so may damage the
hard disk drive of your camcorder.
• If you repeat recording/deleting images for a
long time, fragmentation of data occurs on the
media. Images cannot be saved or recorded. In
such a case, save your images on some type of
external media first, and then perform [MEDIA
FORMAT]*.
• Fasten the grip belt and hold your camcorder
correctly while recording.
US
6
• To adjust the LCD panel, open the LCD panel
90 degrees to the camcorder (1), then rotate it
to the best angle to record or play (2). You can
rotate the LCD panel 180 degrees to the lens
side (2) to record in mirror mode.
190 degrees to the
camcorder
290 degrees
(max.)
2180 degrees (max.)
• The viewfinder and the LCD screen are
manufactured using extremely high-precision
technology, so over 99.99% of the pixels are
operational for effective use. However, there
may be some tiny black points and/or bright
points (white, red, blue, or green in color) that
appear constantly on the LCD screen. These
points are normal results of the manufacturing
process and do not affect the recording in any
way.
• Remove the insulation sheet before using the
Remote Commander.
Insulation sheet
Types of "Memory Stick" you can use
with your camcorder
• For recording movies, it is recommended that
you use a "Memory Stick PRO Duo" of 1 GB or
larger marked with:
–
PRO Duo")*
–
PRO-HG Duo")
* Marked with Mark2 or not, either can be
used.
• A "Memory Stick PRO Duo" of up to 8 GB has
been confirmed to operate correctly with this
camcorder.
("Memory Stick
("Memory Stick