Sony Handycam HDRSR11 Operating Manual page 30

You cannot install "Picture Motion
Browser."
• Check the computer environment
required to install "Picture Motion
Browser."
• Install "Picture Motion Browser" in the
proper order (p. 27).
"Picture Motion Browser" does not
work correctly.
• Quit "Picture Motion Browser" and
restart your computer.
Your camcorder is not recognized by
the computer.
• Disconnect devices from the USB jack
of the computer other than the
keyboard, mouse, and your camcorder.
• Disconnect the USB cable from the
computer and the Handycam Station,
and restart the computer, then connect
the computer and your camcorder again
in the proper order.
US
30
Self-diagnosis display/Warning
indicators
If indicators appear on the LCD screen or in
the viewfinder, check the following.
If the problem persists even after you have
tried to fix a couple of times, contact your
Sony dealer or local authorized Sony
service facility.
Indicators Causes/Solutions
C:04:ss • The battery pack is not an
"InfoLITHIUM" battery pack
(H series). Use an
"InfoLITHIUM" battery pack
(H series) (p. 9).
• Connect the DC plug of the
AC Adaptor to the DC IN jack
of the Handycam Station or
your camcorder securely
(p. 9).
C:13:ss / • Remove the power source.
C:32:ss Reconnect it and operate your
camcorder again.
E:20:ss / • A malfunction that you cannot
E:31:ss / service has occurred. Contact
E:61:ss / your Sony dealer or local
E:62:ss / authorized Sony service
E:91:ss / facility. Inform them of the 5-
E:94:ss digit code, which starts from
"E."
101-0001 • When the indicator flashes
slowly, the file is damaged or
unreadable.
• An error may have occurred
with the hard disk drive in
your camcorder.
• The hard disk of the camcorder
is full. Delete unnecessary
images on the hard disk.
• An error may have occurred
with the hard disk drive in
your camcorder.
E • Battery power is low.
• The temperature of your
camcorder is getting high.
Turn off your camcorder and
leave it in a cool place.