Flash Level; Redeye Reduc - Sony Handycam HDR-SR5E Handbook

ZEBRA
Diagonal stripes appear in portions of the
screen where brightness is at a preset level.
This is useful as a guide when adjusting the
brightness. When you change the default
setting, is displayed. The zebra pattern
is not recorded.
B OFF
The zebra pattern is not displayed.
70
The zebra pattern appears at a screen
brightness level of about 70 IRE.
100
The zebra pattern appears at a screen
brightness level of about 100 IRE or
higher.
b Notes
• Portions of the screen where brightness is about
100 IRE or above may appear overexposed.
z Tips
• IRE represents the screen brightness.
REMAINING
B AUTO
Displays the remaining recording time of
movies for about 8 seconds in situations
such as those described below.
– When your camcorder recognizes the
remaining hard disk capacity with the
POWER switch set to
– When you press DISP/BATT INFO to
switch the indicator from off to on with
the POWER switch set to
– When you select the movie recording
mode on the HOME MENU.
ON
Always displays the remaining hard disk
indicator.
66
b Notes
• When the remaining recordable time for movies
You can set this function when you use the
built-in flash, or an external flash (optional)
that is compatible with your camcorder.
You can set this function when you use the
built-in flash, or an external flash (optional)
that is compatible with your camcorder.
You can prevent redeye by activating the
flash before recording.
Set [REDEYE REDUC] to [ON], then press
setting.
(Movie).
(Movie).
b Notes
• The redeye reduction may not produce the
is less than 5 minutes, the indicator stays on the
screen.

FLASH LEVEL

HIGH( )
Makes the flash level higher.
B NORMAL( )
LOW( )
Makes the flash level lower.

REDEYE REDUC

(flash) (p. 30) repeatedly to select a
(Auto redeye reduction): Pre-flashes to
reduce redeye before the flash automatically
flashes when there is insufficient ambient
light.
r
(Forced redeye reduction): Always
uses the flash and the redeye reducing pre-
flash.
r
(No flash): Records without flash.
desired effect due to individual differences and
other conditions.