Wide Select; Auto Slw Shuttr; Digital Zoom - Sony Handycam HDR-SR5E Handbook

WIDE SELECT

When recording with SD (standard
definition) image quality, you can select the
aspect ratio according to the TV connected.
Refer also to the instruction manuals
supplied with your TV.
B 16:9 WIDE
Records images to the full screen on a 16:9
(wide) TV screen.
4:3 ( )
Records images to the full screen on a 4:3
TV screen.
b Notes
• Set [TV TYPE] correctly according to the TV
connected for playback (p. 73).

DIGITAL ZOOM

You can select the maximum zoom level in
case you want to zoom to a level greater
than 10 × (the default setting) during
recording. Note that the image quality
decreases when you use the digital zoom.
The right side of the bar shows the digital
zooming factor. The zooming zone
appears when you select the zooming
level.
B OFF
Up to 10 × zoom is performed optically.
20 ×
Up to 10 × zoom is performed optically,
and after that, up to 20 × zoom is
performed digitally.
80 × (HDR-SR5E)
Up to 10 × zoom is performed optically,
and after that, up to 80 × zoom is
performed digitally.
STEADYSHOT
You can compensate for camera shake (the
default setting is [ON]). Set
[STEADYSHOT] to [OFF] (
using a tripod (optional), then the image
becomes natural.

AUTO SLW SHUTTR

(Auto Slow Shutter)
When recording in dark places, the shutter
speed is automatically reduced to 1/25
second (The default setting is [ON]).
X.V.COLOR
When recording, set to [ON] to capture
wider range of colors. Various colors such
as the brilliant color of flowers and
turquoise blue of the sea can be more
faithfully reproduced.
b Notes
• Set [X.V.COLOR] to [ON] only when the
recorded content will be played back on an
x.v.Color-compliant TV. Otherwise, set to
[OFF] (the default setting).
• If the movie recorded with this function [ON] is
played back on an non-x.v.Color-compliant TV,
the color may not be reproduced correctly.
• [X.V.COLOR] cannot be set to [ON]:
– while recording with SD (standard definition)
image quality
– while recording a movie.
GUIDEFRAME
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The frame is not recorded. Press DISP/
BATT INFO to make the frame disappear
(The default setting is [OFF]).
z Tips
• Positioning the subject at the cross point of the
guide frame makes a balanced composition.
) when
65