About The "Infolithium" Battery Pack - Sony Handycam HDR-SR5E Handbook

Notes on using "Memory Stick Micro"
(optional)
• To use a "Memory Stick Micro" with this
camcorder, you need a Duo-sized M2 Adaptor.
Insert the "Memory Stick Micro" into the Duo-
sized M2 Adaptor, and then insert the adaptor
into the Memory Stick Duo slot. If you insert a
"Memory Stick Micro" into this camcorder
without using a Duo-sized M2 Adaptor, you
might not be able to remove it from the
camcorder.
• Do not leave the "Memory Stick Micro" within
the reach of small children. They might
accidentally swallow it.
On image data compatibility
• Image data files recorded on a "Memory Stick
Duo" by your camcorder conform to the
"Design rule for Camera File system" universal
standard established by the JEITA (Japan
Electronics and Information Technology
Industries Association).
• On your camcorder, you cannot play back still
images recorded on other devices (DCR-
TRV900E or DSC-D700/D770) that do not
conform to the universal standard. (These
models are not sold in some regions.)
• If you cannot use a "Memory Stick Duo" that
has been used with another device, format it
with your camcorder (p. 58). Note that
formatting erases all information on the
"Memory Stick Duo."
• You may not be able to play back images with
your camcorder:
– When playing back image data modified on
your computer.
– When playing back image data recorded with
other devices.
About the "InfoLITHIUM"
battery pack
Your camcorder operates only with an
"InfoLITHIUM" battery pack (H series).
"InfoLITHIUM" H series battery packs
have the mark.
What is an "InfoLITHIUM" battery
pack?
An "InfoLITHIUM" battery pack is a
lithium-ion battery pack that has functions
for communicating information related to
operating conditions between your
camcorder and an optional AC Adaptor/
charger.
The "InfoLITHIUM" battery pack
calculates the power consumption
according to the operating conditions of
your camcorder, and displays the remaining
battery time in minutes.
With an AC Adaptor/charger, the remaining
battery time and charging time appear.
To charge the battery pack
• Be sure to charge the battery pack before you
start using your camcorder.
• We recommend charging the battery pack in an
ambient temperature of between 10 °C to 30 °C
(50 °F to 86 °F) until the
turns off. If you charge the battery pack outside
of this temperature range, you may not be able
to charge it efficiently.
To use the battery pack effectively
• Battery pack performance decreases when the
surrounding temperature is 10 °C (50 °F) or
below, and the length of time you can use the
battery pack becomes shorter. In that case, do
one of the following to use the battery pack for a
longer time.
– Put the battery pack in a pocket to warm it up,
and insert it in your camcorder right before
you start taking shots.
– Use a large capacity battery pack: NP-FH70/
FH100 (optional).
• Frequent use of the LCD screen or a frequent
playback, fast forward or rewind operation
wears out the battery pack faster.
We recommend using a large capacity battery
pack: NP-FH70/FH100 (optional).
• Be sure to set the POWER switch to OFF
(CHG) when not recording or playing back on
your camcorder. The battery pack is also
consumed when your camcorder is in recording
standby or playback pause.
/CHG (charge) lamp
101