Toro Greensmaster 800 Operator's Manual page 14

Figure 15
Parking Brake
The parking brake (Figure
the service brake. Fully engage the service brake and
push the parking-brake knob to allow the service brake
to rest on the parking-brake pin. Engage the service
brake to release the parking brake. You must release
the brake before you engage the traction drive.
Figure 16
Operator-Presence Control
Optional
If equipped, the operator-presence control
14) is located on the rear of the handle. Push the
operator-presence control against the handle. You
must engage, the operator-presence control before
moving the traction-drive lever. If you release the
operator-presence control, the engine shuts off.
16) is located at the base of
(Figure
Reel-Drive Lever
The reel-drive lever
front corner of the machine. The lever has 2 positions:
•
E —move the lever forward to engage the
NGAGE
reel.
•
D —move the lever rearward to
ISENGAGE
disengage the reel.
g016976
1. Reel-drive lever
Choke Lever
The choke lever
of the engine. The lever has 2 positions: R
C . Move the lever to the C
HOKE
starting a cold engine. After the engine starts, move
the lever to the R
g016977
1. Choke lever
14
(Figure 17) is located on the right,
Figure 17
(Figure 18) is located on the left front
position when
HOKE
position.
UN
Figure 18
2. Fuel-shutoff valve
g016978
and
UN
g024364