Panasonic KX-TDA100D Getting Started page 27

WWW.ERTEBATGROUP.COM
Setting an Extension Port to Use a DSS Console
1. Under Configuration, click Slot.
2. Move the mouse pointer over the desired extension card
to display the menu of options.
3. Click Ous to set the card to out-of-service status.
4. Move the mouse pointer over the card again, then click
Port Property.
5. For DPT Type, set the Type to DSS and assign the
Location No..
6. Click OK.
7. Under Extension, click DSS Console.
8. Select the desired pair extension number from Pair
Extension.
9. Assign features to flexible buttons as required.
10. Click OK.
11. Under Configuration, click Slot.
12. Move the mouse pointer over the card to display the
menu of options.
13. Click INS to set the card to in-service status.
14. Click Close.
WWW.ERTEBATGROUP.COM
4.3 Programming the PBX
Getting Started 27