Specifications; Troubleshooting - Dual DBTMA100 Quick Start Manual

DBTMA100

SPeCIfICATIOnS

BLUeTOOTh
• BT: 4.2
• BT Range: 33Ft / 10M (Class 2)
• BT Profiles: A2DP / AVRCP
AMPLIfIeR
• Frequency Response: 20~22kHz
• Channels: 2
• Bridgeable: No
• Amplifier Type: Class D
• Power Input: 15VDC / 2A (up to 24VDC / 5A allowed)
• RMS Power Output: 25W x 2 / 15VDC @ 4Ω
• MAX Power Output: 50W x 2 / 24VDC @ 4Ω
• Minimum Impedance: 4~8Ω nominal
GeneRAL
• Storage Temperature: 5 F to 160
o
• Operation Temperature: 14 F to 125
o
• Weight: 1.15lbs / 2.4Kg
• Dimensions Inches WxDxH: 5.75 x 4.25 x 1.50
• Color: Black
10
SPeCIfICATIOnS SUBJeCT TO ChAnGe WIThOUT nOTICe
- Specifications
F / -15 C to 72 C
o o o
F / -10 C to 52 C
o o o
DBTMA100 - Trouble Shooting
TROUBLe ShOOTInG
TROUBLE CAUSE
AC Power is OFF
AC/DC wall adapter is
Unit will not turn on unplugged
Volume level is low or
muted
No sound is heard Device is paused or muted
The audio quality is Device volume level is too
poor low or muted
The audio quality is
poor after connection
with a Bluetooth The Bluetooth reception
enabled device is poor
SUPPORT
• Call us toll-free at 1-866-382-5476
• E-mail us at cs@dualav.com
SOLUTION
Turn wall switch ON /
check breakers
Plug AC/DC adaptor into
wall
Turn the DBTMA100
volume level up
Check your Devices
playing / volume status
Raise the Device volume
to a higher level
Move the Device closer
to the audio system or
remove any obstacle
between the Device
11