Table of Contents
Advertisement
3. Steam ironing is available for all temperature setting except
"Dot1". You can hold the steam trigger to generate steam for
steam ironing. The respective steam indicator for "P-temp",
"Dot 2", "Dot 3" and "Max" will ash indicates it is generating
steam. Release the steam trigger to stop generating steam.
4. You can adjust the temperature setting of the appliance by
pressing the function button. The corresponding temperature
symbol will be ashing until the iron is ready for use.
5. After use, long press the function button for 2 seconds to turn
o the appliance.
6. After every use, follow the instructions in "Draining the water".
It is recommended to drain the water inside iron after use.
VERTICAL STEAMING
You can also remove wrinkles on delicate garments in hanging position,
hanging curtains, or other hanging fabrics:
1.
Select your desired temperature setting with steam ironing available.
2.
Hold the iron in vertical position 15 to 30 centimeters
away from the garment (Figure 16).
3.
Press the steam trigger.
Warning: Do not apply steam on any clothes or fabrics that are being
worn by human or pets. Temperature of steam is very high.
DRAINING THE WATER
Disconnect the iron from the mains supply outlet.
1.
Pull out the water tank (Figure 17).
2.
Open the Water Inlet Cover and drain water inside the water tank (Figure 18).
3.
Insert back the water tank in its place (Figure 19).
Figure 17
Figure 18
Figure 16
Figure 19
7
Advertisement
Table of Contents
