Identification Of Parts; Technical Specification - usha Techne Pro 5000 Instruction Manual

Table of Contents

Advertisement

9.
Do not roll the power cord or steam hose around the iron unit or base for storage until it has
cooled down completely.
10. Do not attempt to open the cabinet or dismantle any parts from the appliance, there is no
serviceable part inside.
11. The lling aperture must not be opened during use. Instructions for the safe re lling of the
water tank is given separately in manual.
12. Do not allow children to perform cleaning and user maintenance when they are without
supervision.
13. Do not touch the surfaces shown in Figure 2 and Figure 3 below, during or just after ironing.
They are HOT!
CAUTION: Hot Surface!
Figure 1: Left Side-Hot Surface

IDENTIFICATION OF PARTS

2
3
4
5
6

TECHNICAL SPECIFICATION

RATED VOLTAGE
RATED POWER
WATER TANK CAPACITY : 1 Litre
Due to continuous e orts for product upgradation, speci cations are subject to change without prior notice.
1
: 240 V, 50 Hz AC
: 2400 W
CAUTION: Hot Surface!
Figure 2: Right Side-Hot Surface
7
11
8
9
10
12
1.
Function Button
2.
Control Panel
3.
Anti-scale Cartridge
4.
Carry Lock
5.
Water Inlet Cover
6.
Water Tank
7.
Steam Trigger
8.
Steam Hose
9.
Soleplate
10.
Power Cord
Iron Unit
11.
Base
12.
2

Advertisement

Table of Contents
loading

Table of Contents