Table of Contents
Advertisement
2.
Fill the water tank to the max level (See "FILLING THE WATER TANK")
and plug in the appliance.
3.
Press the function button follow with the steam trigger and hold
both buttons for 3 seconds. The appliance will then enter the
self-cleaning mode.
4.
Press the function key to proceed self-cleaning. Press the steam
trigger to resume ironing. (Note: when self-cleaning is con rmed to
proceed, it will not be able to terminate until the self-cleaning
process is completed.)
5.
Hold the iron about 15 centimeters above the sink in the ironing
position. Loose material will come out through the steam holes of
the iron together with water (Figure 10). The appliance will resume to the previous ironing
setting when complete.
6.
Ironing with a damped cloth to remove any deposits on the sole-plate. Remove any water
stains that may have formed on the soleplate.
7.
Long press the function button and unplug the appliance to switch it o .
USING YOUR APPLIANCE
1.
This appliance is designed to use normal tap water. Other liquid might damage the appliance.
2.
Connect the appliance with a suitable mains supply outlet.
3.
Start ironing after the icons on the display panel stop ashing which indicates the required
temperature is reached and ready to use.
4.
Always disconnect the appliance from the main after use.
BEFORE THE FIRST TIME USE
1.
Remove any protective lms or stickers on the appliance.
2.
Unwind and straighten the power cord.
Note: When using the Steam Station for the rst time, do not use it on your laundry. Some
residue may remain inside the appliance. Begin the rst time ironing with an old towel. Press
the steam trigger to ensure the residues are completely released.
HINT FOR IRONING
1.
Sort out the articles to be ironed according to the type of fabric. This will minimize the
frequency of temperature adjustment for di erent garment.
2.
Test ironing a small area on the backside or inside the garment if you are unsure about the
type of fabric. Start with a low temperature and increase gradually.
3.
Wait for 2 minutes before ironing the heat sensitive fabrics. Temperature adjustment needs
certain time to reach the required level, no matter it is higher or lower.
4.
Delicate fabrics such as silk, wool, velour, etc. are best ironed with an ironing cloth to prevent
shine marks.
Figure 9
Figure 10
5
Advertisement
Table of Contents
