OPERATION
STARTING AND STOPPING THE CHAINSAW
A. Starting the chainsaw:
•
Make sure chain tension is at desired setting. Refer to adjusting the chain tension in the
Care and Maintenance section of this manual.
•
Make sure no objects or obstructions are in the immediate vicinity which could come in
contact with the bar and chain.
•
Insert the battery into the chainsaw.
•
Press in the safety lock. This makes the trigger operational.
•
Press and hold the trigger, and keep it pressed for continued operation.
B. Stopping the chainsaw
•
Release the trigger.
•
Upon release of the trigger, the safety lock will be automatically reset to the lock position.
•
This chainsaw is equipped with a mechanical chain brake which is designed to stop a
moving chain in a fraction of a second if kickback occurs, reducing the chances of severe
injury. To manually engage the chain brake push the chain brake forward. This action will
lock the chain from moving; to release the chain brake, pull the brake toward the handle.
This will reset the chain brake.
NOTE: It is normal for the chain to coast to a stop once the trigger is released.
Safety Lock
Trigger
13