Safety Information - Fluke CNX t3000 Calibration Manual

CNX t3000
Calibration Manual

Safety Information

A Warning identifies conditions and procedures that are dangerous to the user. A
Caution identifies conditions and procedures that can cause damage to the Product or the
equipment under test.
To prevent possible electrical shock, fire, or personal injury:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2
www.netzerotools.com
 Warning
Carefully read all instructions.
Use the Product only as specified, or the protection
supplied by the Product can be compromised.
Limit operation to the specified measurement category,
voltage, or amperage ratings.
Do not touch voltages > 30 V ac rms, 42 V ac peak, or 60 V
dc.
Do not use the Product around explosive gas, vapor, or in
damp or wet environments.
Do not use, and disable the Product if it is damaged.
Do not use the Product if it operates incorrectly.
The battery door must be closed and locked before you
operate the Product.
Replace the batteries when the low battery indicator shows
to prevent incorrect measurements.
Have an approved technician repair the Product.
Use only specified replacement parts.
Do not connect directly to mains.
For safe operation and maintenance of the Product:
Remove batteries to prevent battery leakage and damage
to the Product if it is not used for an extended period.
Repair the Product before use if the battery leaks.
Be sure that the battery polarity is correct to prevent
battery leakage.
Batteries contain hazardous chemicals that can cause
burns or explode. If exposure to chemicals occurs, clean
with water and get medical aid.
www.netzerotools.com