Sony Handycam 2-887-515-14(1) Operating Manual page 52

Playing the picture on a TV (Continued)
Type Camcorder
3
b Notes
• When connecting only an S VIDEO plug (S VIDEO channel), audio signals are not output. To output
audio signals, connect the white and red plugs of the A/V connecting cable with an S VIDEO cable to the
audio input jack of your TV.
• This connection produces higher resolution pictures compared with the A/V connecting cable (Type
3
* Change the settings according to the TV connected.
b Notes
• If you connect your camcorder to your TV using more than one type of cable to output images from a jack
other than the i.LINK jack, the order of priority of the output signals is as follows:
HDMI t component video t S VIDEO t audio/video.
• See page 107 for the details of i.LINK.
When connecting to your TV via a VCR
Select the connecting method on page 73 depending on the input jack of the VCR. Connect
your camcorder to the LINE IN input on the VCR using the A/V connecting cable. Set the
input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.).
If your TV/VCR has a 21-pin adaptor (EUROCONNECTOR)
Use a 21-pin adaptor (optional) to view playback pictures.
52
Cable
A/V connecting cable with
S VIDEO (optional)
A/V connecting cable
(supplied)
TV
(Red)
(White)
(Yellow)
(Red)
(White)
(Yellow)
: Signal flow
Menu Setting
(IN/OUT REC)
menu t
[VCR HDV/DV] t
[AUTO] (p. 66)
[TV TYPE] t
[16:9]/[4:3]* (p. 67)
(IN/OUT REC)
[VCR HDV/DV] t
[AUTO] (p. 66)
[TV TYPE] t
[16:9]/[4:3]* (p. 67)
).