Table of Contents
Advertisement
Step 7: Inserting a tape or a "Memory Stick Duo" (Continued)
2
Insert the "Memory Stick Duo"
into the "Memory Stick Duo" slot
in the right direction until it clicks.
Access lamp
b Note
• If you insert the "Memory Stick Duo" into
the slot in the wrong direction, the "Memory
Stick Duo," the "Memory Stick Duo" slot,
or image data may be damaged.
To eject a "Memory Stick Duo"
Lightly push the "Memory Stick Duo"
once.
b Notes
• When the access lamp is lit or flashing, your
camcorder is reading/writing data. Do not shake
or knock your camcorder, turn the power off,
eject the "Memory Stick Duo," or remove the
battery pack. Otherwise, image data may be
damaged.
• When inserting or ejecting the "Memory Stick
Duo," be careful with the "Memory Stick Duo"
from popping out and dropping.
24
Advertisement
Table of Contents
