IMPORTANT ELECTRICAL INSTRUCTIONS
WARNING!
NEVER remove any cover without first disconnecting AC power. If voltage varies by ten percent (10%)
or more, the performance of your Incline Stepper may be affected. Such conditions are not covered
under your warranty. If you suspect the voltage is low, contact your local power company or a
licensed electrician for proper testing.
NEVER expose this Incline Stepper to rain or moisture. This product is NOT designed for use outdoors,
near a pool or spa, or in any other high humidity environment. The operating temperature
specification is 40 to 120 degrees Fahrenheit, and humidity is 95% non‐condensing (no water drops
forming on surfaces).
Circuit Breakers: Some circuit breakers used in homes are not rated for high inrush currents that can
occur when the Incline Stepper is first turned on or even during use. If your Incline Stepper is tripping
the house circuit breaker (even though it is the proper current rating) but the circuit breaker on the
Incline Stepper itself does not trip, you will need to replace the home breaker with a high inrush type.
This is not a warranty defect. This is a condition we as a manufacture have no ability to control. This
part is available through most electrical supply stores. Examples: Grainger part # 1D237, or available
online at www.squared.com part #QO120HM. The electrical outlet used should have a dedicated 15
amp circuit breaker
GROUNDING INSTRUCTIONS
This product must be grounded. If the Incline Stepper should malfunction or breakdown, grounding
provides a path of least resistance for electric current, reducing the risk of electric shock. This product
is equipped with a cord having an equipment‐grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
DANGER ‐ Improper connection of the equipment‐grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided with the product if it will not fit the outlet; have a
proper outlet installed by a qualified electrician.
This product is for use on a nominal 120‐volt, 15‐amp circuit, and has a grounded plug that looks like
the one illustrated below. A temporary adapter that looks like the adapter illustrated below may be
used to connect this plug to a 2‐pole receptacle as shown below if a properly grounded outlet is not
available. The temporary adapter should be used only until a properly grounded outlet, (shown
below) can be installed by a qualified electrician. The green coloured rigid ear lug, or similar,
extending from the adapter, must be connected to a permanent ground such as a properly grounded
outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.
Dyaco Canada Inc. 2017
6
customerservice@dyaco.ca