Operating Data; Mechanics; Connection - LinMot S01-72/1000 Installation Manual

Installation Guide Power Supply
Safety / Standards
EMC
Flicker
Interference suppression /
Interference immunity
ESD
Electrical fields
Burst
Surge
HF Immunity
Voltage drop
Interference emission
Weight

4 Operating data

Temperature range

-25°C...70°C integral, temperature controlled fan,air intake bottom-up (fan swichted
on/off in two steps dependent on temperature)
Derating

2% / K at +60°C
Operation in any assembly position possible. The distance between the surrounding
components and the air admission and air exit holes should be at least 50 mm.
Please ensure that exhaust air is not immediately sucked in again.
Ensure that the surrounding casing protects the appliance against fire!
Protect the products against moisture, humidity, condensation and dirt.

5 Mechanics

5.1 Connection

Main input:
Load output:
Control signals:
Page 6 / 12
EN 60950-1 / IEC 60950-1 / VDE 0160 safety class I / VDE 0100
/ IP20 CSA-C22.2 No 107 / CSA-C22.2 No. 60950-1-03 UL Std.
60950-1 / UL Std. 508 (Operation in Delta mains only for UL508)
Input: EN 61000-4-4 4kV / Output: EN 61000-4-4 2kV
Input: EN 61000-4-5 2/4kV / Output: EN 61000-4-5 0,5kV
EN 61000-6-3 / EN 61204-3 / EN 55022 / EN 55011 class B
4-pole
1,5 - 4 mm² strand/wire
Min. tightening torque: 0,5Nm
5-pole
2,5 - 4 mm² strand/wire
Min. tightening torque: 0,5Nm
4-pole
0,5 - 1,5 mm² strand/wire
Min. tightening torque: 0,22Nm
Power range 1000 W
EN 61000-3-3
EN 61000-6-2 / EN 61204-3
EN 61000-4-2 8/15 kV
EN 61000-4-3 Noise level 10V/m
EN 61000-4-6 noise level 10V
EN 61000-4-11
Radiation depends on assembly
2.0 kg
ENG
NTI AG / LinMot