Related Manuals for LinMot S02-72/1000
Summary of Contents for LinMot S02-72/1000
- Page 1 Installation Guide Power Supply Type S02-72/1000 Power range 1000 W NTI AG / LinMot Dok-Nr. 0185-0118-E_1V0_IG_Power_Supplies_S02_72_1000...
-
Page 2: Table Of Contents
LED Blink Codes ............................7 Physical Dimension..........................8 Output Voltage Regulation ........................9 Power Boost .............................. 9 Ordering Information..........................10 International Certificates ........................10 Declaration of Conformity and CE-marking ..................16 Page 2 / 17 Type S02-72/1000 NTI AG / LinMot... -
Page 3: General Information
1.4 Liability NTI AG (as manufacturer of LinMot linear motors and MagSpring products) excludes all liability for damages and expenses caused by incorrect use of the products. This also applies to false applications, which are caused by NTI AG's own data and notes, for example in the course of sales, support or application activities. -
Page 4: Safety Instructions
• LinMot servo drives, power supplies and the accessory components can include live and moving parts (depending on their type of protection) during operation. Surfaces can be hot. Non−authorized removal of the required cover, inappropriate use, incorrect installation or operation create the risk of severe injury to persons or damage to material assets. -
Page 5: Electrical Connection
PGND to be sure that the capacitors have discharged below 42 VDC. The housing of the power supply can have an operating temperature of > 80 °C: Contact with the heat sink results in burns. NTI AG / LinMot Type S02-72/1000 Page 5 / 17... -
Page 6: Mains Connection And Grounding
In order to assure a safe and error free operation, and to avoid severe damage to system components, all system components must be well grounded to protective earth PE. This includes both LinMot and all other control system components on the same ground bus. -
Page 7: Description Of The Connectors / Interfaces
- Stripping length: 10 mm - total conductor length must be 10 m or less 5 LED Blink Codes LED Blink Codes enabled error Description Power supply is enabled Off / On Error occurred NTI AG / LinMot Type S02-72/1000 Page 7 / 17... -
Page 8: Physical Dimension
Installation Guide Power Supply 6 Physical Dimension in mm Figure 2: Drawing of the power supply S02-72/1000-xS Power Supplies Width Height Height with fixings Depth Weight Mounting screws up to M5 Mounting distance 257 - 262 Case, degree of protection Storage temperature °C... -
Page 9: Output Voltage Regulation
0.5 seconds, the current is limited to the nominal current until a cooldown period has passed. The cooldown period can be calculated with Figure 3. Below 0.5 seconds, no boost break is necessary. Figure 3: Boost time versus required break time NTI AG / LinMot Type S02-72/1000 Page 9 / 17... -
Page 10: Ordering Information
This mark is valid for the USA and Canada and eases certification of your machines and systems in these areas. File number E316095 UL 61800-5-1 Power Conversion Equipment CSA C22.2 Industrial Control Equipment Page 10 / 17 Type S02-72/1000 NTI AG / LinMot... - Page 11 Installation Guide Power Supply NTI AG / LinMot Type S02-72/1000 Page 11 / 17...
- Page 12 Installation Guide Power Supply Page 12 / 17 Type S02-72/1000 NTI AG / LinMot...
- Page 13 Installation Guide Power Supply NTI AG / LinMot Type S02-72/1000 Page 13 / 17...
- Page 14 Installation Guide Power Supply Page 14 / 17 Type S02-72/1000 NTI AG / LinMot...
- Page 15 Installation Guide Power Supply NTI AG / LinMot Type S02-72/1000 Page 15 / 17...
-
Page 16: Declaration Of Conformity And Ce-Marking
EN 61800-5-1: 2007 EN 61000-6-2: 2005 (Immunity for industrial environments) EN 61000-6-4: 2007 (Emission for industrial environments) Spreitenbach, 29.12.2021 Dr.-Ing. Ronald Rohner Dr.-Ing. Marco Hitz CEO NTI AG RESPONSIBLE FOR DOCUMENTATION Page 16 / 17 Type S02-72/1000 NTI AG / LinMot... - Page 17 ALL LINEAR MOTION FROM A SINGLE SOURCE Europe / Asia Headquarters North / South America Headquarters NTI AG - LinMot & MagSpring LinMot USA Inc. Bodenaeckerstrasse 2 N1922 State Road 120, Unit 1 CH-8957 Spreitenbach Lake Geneva, WI 53147 Switzerland Sales / Administration: +41 56 419 91 91 Sales / Administration: 262.743.2555...
Need help?
Do you have a question about the S02-72/1000 and is the answer not in the manual?
Questions and answers